Passion for valves
EE/GG
CONTROL DAMPERS WITH CENTRICALLY
MOUNTED DAMPER DISC
Control butterfly valves with a centrically mounted disc, suitable for applications with gases and liquids of all kinds. The solidly designed components enable maintenance-free operation and maximum operational reliability.
Technical Information
- DN 80 – DN 3600 or 3″ – 144″
- PN 6 – PN 400 / Class 150 – 2500
- -196°C – +1150°C
- AD 2000/ASME/API
- < 0.5% Kvs 90° EE; < 0.05% Kvs 90° GG
- Leakage rate to ANSI FCI 70.2 Class II-III
- Class IV on request
CONTROL DAMPERS WITH CENTRICALLY
DESIGN FEATURES
- Control butterfly valve with a centrically mounted disc.
- Body in cast or welded design, depending on the material.
- The disc, made of cast or forged material, is designed for optimal flow and connected to the drive shaft by means of dowel pins. Depending on the tightness requirements, the disc is either through-seating or rib-seating.
- The zero position in the closed position is adjusted and limited by a stop in the actuator. Depending on the application conditions, the disc opening angle can be selected up to 90°. For control butterfly valves, the opening angle is preferably 60°–70°, taking into account the flow characteristic and the dynamic torques.
- In the standard version, the shaft is a two-piece plug-in shaft. Power transmission from the actuator to the shaft is via a parallel key. For higher pressures, a continuous shaft with a suitable shaft-hub connection is also possible.
- The shaft bearings are maintenance-free, internal plain bearings. The materials are matched to the operating conditions and the shaft material. An additional external bearing supports the forces of the actuator; the associated bearing bracket is the connection point between the butterfly valve and actuator. On request, for dirty media/high temperatures, external bearings on both sides can be provided without internal bearings.
- The shaft passage from the media chamber to the atmosphere is sealed by an adjustable packing whose material is matched to the operating conditions. Sealing to TA Luft is available. Special versions for additional packing lubrication as well as for sealing gas or intermediate extraction and bearing purging are available.
- Actuator adaptation to DIN/ISO 5211.
APPLICATIONS
- Exhaust air technology
- Plant engineering
- Refineries
- Engine test benches
- Furnace construction
- Shipbuilding
- Steel industry
- Chemical Industry
Custom solutions
- Heating jacket for media that resinify or tend to cake
- High-temperature version with extended external bearings
- High-pressure valve Class 2500: PN 400 with welded ends
- Low-temperature version with extended external bearings
- Noise reduction solution: anti-cavitation
Designs
High-pressure version
High-temperature version
Cryogenic version KXT
Heating jacket KXL – HJ
Solution for noise reduction / anti-cavitation
APPLICATIONS
Customized Solutions
for Your Application
Wherever particularly high safety standards are applied, perfect solutions are required for
shutoff and control.
OHL Gutermuth has earned a strong reputation worldwide with customized valves for specific industrial applications. Combined expertise and decades of experience from two established specialized companies, coupled with a pronounced quality consciousness and high personal commitment, provide the best prerequisites for meeting future challenges.
LNG Applications
Valves for all areas of the LNG production chain.
Hydrogen Technologies
We are your expert for an environmentally friendly energy transition.
CONCENTRATED SOLAR POWER
Your specialist for sustainable valve solutions.